BMW 335d F30/F31/F34 N57

The BMW 335d belongs to the F30/F31/F34 3 Series generation, built approximately 2013–2019. It uses the N57, a 3.0L turbocharged diesel inline-six engine. Covered body styles are Sedan, Touring and Gran Turismo. Depending on the variant, it was offered with xDrive all-wheel drive, paired with a manual gearbox or an automatic gearbox. Engine management is by a BMW DDE; identify the exact ECU hardware and software from the vehicle before ordering a file.

Model & Generation Context

Engine family

N57

Exact revision is production-date and vehicle-specific

Displacement

3.0L

Production

c. 2013–2019

Approximate; confirm the build date from the vehicle

Fuel Type

Diesel

Supported Model Variants

DesignationEngineProductionChassis & bodyDrivetrain

BMW 335d

Engine: N57

Production: c. 2013–2019

Chassis: F30, F31, F34 · Sedan, Touring, Gran Turismo

Drivetrain: xDrive

Engine Platform

BMW N57 Engine Hub

Platform overview, tuning paths, reliability notes and diagnostics

All BMW N57 Models

Every model in the directory using the N57 engine

ECU & Transmission Context

BMW DDE — identify from vehicle

Read the ECU hardware and software numbers from the vehicle before ordering a file.

Manual gearbox

Gearbox specification is vehicle-specific; confirm it from the vehicle order data.

Automatic gearbox

Gearbox specification is vehicle-specific; confirm it from the vehicle order data.

Identification & Pre-Tuning Checks

Confirm the engine code on the vehicle matches the N57 before ordering a file.
The exact engine revision is production-date and vehicle-specific; it is not inferred from the model name.
Identify the BMW DDE and its exact hardware and software version from the vehicle; it is not inferred from the model name.
Scan for stored fault codes and resolve existing issues before any calibration work.
Check the condition of the DPF, EGR system and, where fitted, the AdBlue (SCR) system.
Gearbox type varies on this model; note whether the car is manual or automatic when submitting a file.

Available Service Paths

Custom Calibration and Datalog Review

Submit datalogs and vehicle configuration for a fully custom calibration review tailored to your specific setup.

Request a Custom Calibration

ECU Read and Support Check

Verify your ECU hardware and software version is supported before starting a calibration project.

Check ECU Support

TCU Calibration Assessment

Assess transmission control unit compatibility and calibration options for your vehicle and gearbox configuration.

Request a TCU File

Stage 1 Torque and Efficiency Calibration

A vehicle-specific diesel calibration focused on torque delivery, fuel efficiency and drivability on standard hardware.

Request a Stage 1 File

DPF Diagnostic and Regeneration Assessment

Diagnose DPF health, regeneration behaviour and fault-code context. Supports repair, regeneration and compliant maintenance.

Request Diagnostic Review

EGR System Diagnosis

Assess EGR valve condition, fault codes and system health to support repair and compliant maintenance decisions.

Request Diagnostic Review

AdBlue / SCR / NOx Diagnostic Assessment

Diagnose AdBlue dosing, SCR catalyst and NOx sensor faults to support compliant repair and system restoration.

Request Diagnostic Review

Related Resources

BMW Pre-Tuning Checklist Stage 1 vs Stage 2 Explained When to Diagnose Before Tuning BMW Diesel Tuning Guide

BMW N57 File Service

Order a file for your BMW 335d

Prepare the original ECU file, vehicle details, fuel and hardware setup before opening a file request.

Open File Service Portal

Original ECU File

Read via OBD, Bench or Boot

Vehicle Details

Model, year and specification

Fuel Information

Fuel type and octane rating

ECU Identification

Hardware and software version