BMW M240i F22/F23 B58
The BMW M240i belongs to the F22/F23 2 Series Coupé & Convertible generation, built approximately 2016–2021. It uses the B58, a 3.0L turbocharged inline-six petrol engine. Covered body styles are Coupé and Convertible. Depending on the variant, it was offered with rear-wheel drive or xDrive all-wheel drive, paired with a manual gearbox or the eight-speed Steptronic automatic. Engine management is expected to come from the BMW DME 8.6 family; confirm the exact ECU hardware and software from the vehicle.
About the BMW M240i F22/F23
The BMW M240i is the six-cylinder model of the F22/F23 2 Series, sold as the two-door F22 Coupé and the F23 Convertible. In Coupé and Convertible form alike, it uses the B58B30M0, the first-generation B58 inline-six.
Both body styles were offered with manual and automatic gearboxes. xDrive availability depended on body and market; in Canada’s 2020 model-year Coupé range, for example, the M240i xDrive came with the automatic only. Drivetrain and gearbox both influence which calibration base suits a car, and the DME hardware and software should be read from the vehicle before work begins.
With an M240i request, please state whether the car is a Coupé or Convertible, rear-wheel drive or xDrive, and manual or automatic. Add the build date, current software version, your usual fuel octane and any hardware or software changes already made.
Model & Generation Context
Engine family
B58
Exact revision is production-date and vehicle-specific
Displacement
3.0L
Production
c. 2016–2021
Approximate; confirm the build date from the vehicle
Fuel Type
Petrol
Supported Model Variants
BMW M240i
Engine: B58
Production: c. 2016–2021
Chassis: F22, F23 · Coupé, Convertible
Drivetrain: RWD, xDrive
Engine Platform
ECU & Transmission Context
BMW DME 8.6 ECU
Read the ECU hardware and software numbers from the vehicle before ordering a file.
Manual gearbox
Gearbox specification is vehicle-specific; confirm it from the vehicle order data.
Eight-speed Steptronic
Gearbox specification is vehicle-specific; confirm it from the vehicle order data.
Identification & Pre-Tuning Checks
- Confirm the engine code on the vehicle matches the B58 before ordering a file.
- The exact engine revision is production-date and vehicle-specific; it is not inferred from the model name.
- BMW DME generation and exact ECU hardware/software variant depend on the vehicle and production version.
- Scan for stored fault codes and resolve existing issues before any calibration work.
- Gearbox type varies on this model; note whether the car is manual or automatic when submitting a file.
Available Service Paths
Stage 1 Calibration File
A vehicle-specific calibration for a healthy engine on standard hardware. Includes ECU file review, fuel and hardware assessment.
Request a Stage 1 FileStage 2 Calibration Review
Review your supporting hardware, thermal setup and fuel configuration before requesting an upgraded calibration file.
Review My Stage 2 SetupCustom Calibration and Datalog Review
Submit datalogs and vehicle configuration for a fully custom calibration review tailored to your specific setup.
Request a Custom CalibrationECU Read and Support Check
Verify your ECU hardware and software version is supported before starting a calibration project.
Check ECU SupportTCU Calibration Assessment
Assess transmission control unit compatibility and calibration options for your vehicle and gearbox configuration.
Request a TCU FilePops and Bangs Request Review
Submit a request for review. Availability depends on vehicle setup, hardware configuration and local road-use requirements.
Availability depends on vehicle setup, hardware and local road-use requirements. Not available for all configurations.
Submit for ReviewRelated Resources
BMW B58 File Service
Order a file for your BMW M240i
Prepare the original ECU file, vehicle details, fuel and hardware setup before opening a file request.
Open File Service PortalOriginal ECU File
Read via OBD, Bench or Boot
Vehicle Details
Model, year and specification
Fuel Information
Fuel type and octane rating
ECU Identification
Hardware and software version